Mostrando entradas con la etiqueta compressor. Mostrar todas las entradas
Mostrando entradas con la etiqueta compressor. Mostrar todas las entradas
jueves, 28 de enero de 2016
ATKColoredCompressor 1.0.0 - Free
I’m happy to announce the release of a colored compressor plugin as well as a
colored expander plugin based on the Audio Toolkit. They are available on Windows
and OS X (min. 10.8) in different formats. They are effectively replacing the
ATKCompressor and ATKExpander plugins by adding several new parameters:
RMS filter (set it to 0 to get peak detection from the old plugins), color
(gain change around the threshold, positive color adding gain and negative color
removing gain), quality (affecting the coloring on a smaller or bigger area around
the threshold). The expander also has a maximum reduction parameter, allowing the user
to specify the maximum amount of gain reduction below the threshold.
The supported formats are:
VST2 (32bits/64bits on Windows, 64bits on OS X)
VST3 (32bits/64bits on Windows, 64bits on OS X)
Audio Unit (64bits, OS X)
Download here
martes, 23 de diciembre de 2014
TLs 2095-Limiting Amplifier - Free
FX, Compressor - Windows, VST
Increase gain by limiting the signal with a "pumping/saturated" character depending
on pressure/release settings.
Adjustable input gain upwards.
Adjustable pressure (a mix of attack/ratio)
Adjustable release1 , the over all release time
Adjustable release2 , controls the "overload" portion of release1 where fast envelope
moves will be suppressed.
Adjustable output , to compensate gain changes with clip indicator.
Soft/Hard mode button, 'Soft' mode will polish the envelope curve to minimize artifacts
that would be obvious on vocals ect (using more CPU)
Low Punch mode button, control an allpass filter centered around 200hz, allowing the
transients to pass before the low end and
thus giving a feeling of more "clicky" or "punchy" sound (IF a low end is present that is).
Stereo Link mode button to preserve stereo field.
Stereo link quality button normal/HQ ,
'normal' will merge the left/right input signals and only process the audio on one channel.
(using less CPU)
'HQ' will process both left/right channels and then join the outgoing envelope curves.
(using more CPU)
The two Stereo mode buttons will be greyed out when processing a mono signal.
(since they do not provide any function at that point)
Gain Reduction led indicator.
Small indicator around the Gain Reduction led indicator showing the output peak level.
Plugin Latency: 0 samples
supported samplerates: 44.1khz - 192khz
Download TLs 2095-Limiting Amplifier
Increase gain by limiting the signal with a "pumping/saturated" character depending
on pressure/release settings.
Adjustable input gain upwards.
Adjustable pressure (a mix of attack/ratio)
Adjustable release1 , the over all release time
Adjustable release2 , controls the "overload" portion of release1 where fast envelope
moves will be suppressed.
Adjustable output , to compensate gain changes with clip indicator.
Soft/Hard mode button, 'Soft' mode will polish the envelope curve to minimize artifacts
that would be obvious on vocals ect (using more CPU)
Low Punch mode button, control an allpass filter centered around 200hz, allowing the
transients to pass before the low end and
thus giving a feeling of more "clicky" or "punchy" sound (IF a low end is present that is).
Stereo Link mode button to preserve stereo field.
Stereo link quality button normal/HQ ,
'normal' will merge the left/right input signals and only process the audio on one channel.
(using less CPU)
'HQ' will process both left/right channels and then join the outgoing envelope curves.
(using more CPU)
The two Stereo mode buttons will be greyed out when processing a mono signal.
(since they do not provide any function at that point)
Gain Reduction led indicator.
Small indicator around the Gain Reduction led indicator showing the output peak level.
Plugin Latency: 0 samples
supported samplerates: 44.1khz - 192khz
Download TLs 2095-Limiting Amplifier
jueves, 9 de octubre de 2014
Rescue MK2 - Free Transient Procesor
FX, Compressor - Windows - VST
Analog style modelled signal designer.
at a glance:
• introduces spatial imaging as well as sonic resolution improvements to program material
• simple yet powerful solo signal alteration: transient shaping, imaging and depth balancing
• subtle analog style signal colouration
• easy emphasizing of signal attack phases
• creates "in the face" sounds as well as subtle stereo enhancements
• stereo field operation maintains mono
compatibility
• signal saturation at high peak levels
• excellent for drum group improvements
• tightens lowend
WARNING:
Lower your listening volume while operating the plugin to avoid hearing damage
or damage of speakers or any other equipment.
Download here:: Rescue MK2
http://www.kvraudio.com/product/rescue-mk2-by-variety-of-sound
Analog style modelled signal designer.
at a glance:
• introduces spatial imaging as well as sonic resolution improvements to program material
• simple yet powerful solo signal alteration: transient shaping, imaging and depth balancing
• subtle analog style signal colouration
• easy emphasizing of signal attack phases
• creates "in the face" sounds as well as subtle stereo enhancements
• stereo field operation maintains mono
compatibility
• signal saturation at high peak levels
• excellent for drum group improvements
• tightens lowend
WARNING:
Lower your listening volume while operating the plugin to avoid hearing damage
or damage of speakers or any other equipment.
Download here:: Rescue MK2
http://www.kvraudio.com/product/rescue-mk2-by-variety-of-sound
miércoles, 13 de agosto de 2014
TesslaSE - Free Compressor
[Windows, VST]
TesslaSE - modelling pleasant sounding 'electric effects' coming from transformer
coupled tube circuits in a digital controlled fashion.
features::
• zero latency processing, low CPU usage
• harmonic enhancements without artefacts (aliasing)
• dynamic noise model
• proprietary signal processing and modelling algorithms implemented
• performance crucial parts are written in assembler, completely SSE optimized
Download here:: Click
TesslaSE - modelling pleasant sounding 'electric effects' coming from transformer
coupled tube circuits in a digital controlled fashion.
features::
• zero latency processing, low CPU usage
• harmonic enhancements without artefacts (aliasing)
• dynamic noise model
• proprietary signal processing and modelling algorithms implemented
• performance crucial parts are written in assembler, completely SSE optimized
Download here:: Click
viernes, 30 de mayo de 2014
ReaPlugs - Free FX´s Compressor
[Windows, VST]
A preview version of some of the plug-ins that are a part of REAPER,
but in standalone form.
Details:
ReaComp
* Ultra-configurable compressor
* Soft knee support
* Sidechain filters, sidechain inputs
* Feedback compression mode
* Program dependent auto-release mode
* Variable RMS size
* Oversampling antialias modes (with optional limiting)
* Optional make-up gain
* Optional lookahead
* Wet/dry mix
* Low CPU use
* Useful metering
ReaXcomp
* Unlimited band compressor
* Great metering per band
* Fantastic sounding filters
* Solo current band mode
* Tons of controls per band (ratio, threshold, knee, attack, release, makeup,
program dependent release, feedback detector, RMS size)
* Adjusting bands in graph is easy (modifiers to change ratio, gain, etc).
ReaDelay
* Multi-tap delay, no practical limit on tap count
* Up to 10 second delay per tap
* Tap lengths can be in time (s/ms) or quarter notes
* Feedback, LPF/HPF, resolution reduction per tap
* Stereo width per tap
* Volume/pan per tap
ReaEQ
* Unlimited band IIR based equalizer
* Support for any number of many types of filters (shelfs, bands, LPF, HPF, notch,
bandpass, allpass)
* Frequency response and phase response display
* Display of approximate note+octave for frequencies
* Per-band bypass control
* Full-view of graph optional for precise editing
* Mouse modifiers/mousewheel usable for editing bandwidth of points in graph
ReaFIR
* FFT based dynamics processor (requires host plug-in delay compensation)
* Supports FFT sizes of 128-32768.
* Useful in/out frequency response display
* Supports defining response curves both using any number of points, or freehand mouse
* EQ - can be used as a linear phase mastering EQ, or as a super-effective surgical EQ
* Compressor - can compress at a fixed ratio with a per-band threshold
* Gate - can gate with per-band threshold
* Subtract - can build noise profiles and subtract noise from the signal
ReaGate
* Ultra-configurable gate
* Sidechain filters, sidechain input
* Lookahead for pre-open
* Hold control
* Hysteresis control
* Variable RMS size
* Can send MIDI events on gate open/close
* Wet/dry mix, noise mix (can add noise when gate is open)
ReaStream
* Supports streaming from host to host of audio and/or MIDI over a LAN segment
* Supports streaming from different host software on each end
* Supports UDP broadcast for streaming one to many (if local network can keep up)
Download here:: Click
A preview version of some of the plug-ins that are a part of REAPER,
but in standalone form.
Details:
ReaComp
* Ultra-configurable compressor
* Soft knee support
* Sidechain filters, sidechain inputs
* Feedback compression mode
* Program dependent auto-release mode
* Variable RMS size
* Oversampling antialias modes (with optional limiting)
* Optional make-up gain
* Optional lookahead
* Wet/dry mix
* Low CPU use
* Useful metering
ReaXcomp
* Unlimited band compressor
* Great metering per band
* Fantastic sounding filters
* Solo current band mode
* Tons of controls per band (ratio, threshold, knee, attack, release, makeup,
program dependent release, feedback detector, RMS size)
* Adjusting bands in graph is easy (modifiers to change ratio, gain, etc).
ReaDelay
* Multi-tap delay, no practical limit on tap count
* Up to 10 second delay per tap
* Tap lengths can be in time (s/ms) or quarter notes
* Feedback, LPF/HPF, resolution reduction per tap
* Stereo width per tap
* Volume/pan per tap
ReaEQ
* Unlimited band IIR based equalizer
* Support for any number of many types of filters (shelfs, bands, LPF, HPF, notch,
bandpass, allpass)
* Frequency response and phase response display
* Display of approximate note+octave for frequencies
* Per-band bypass control
* Full-view of graph optional for precise editing
* Mouse modifiers/mousewheel usable for editing bandwidth of points in graph
ReaFIR
* FFT based dynamics processor (requires host plug-in delay compensation)
* Supports FFT sizes of 128-32768.
* Useful in/out frequency response display
* Supports defining response curves both using any number of points, or freehand mouse
* EQ - can be used as a linear phase mastering EQ, or as a super-effective surgical EQ
* Compressor - can compress at a fixed ratio with a per-band threshold
* Gate - can gate with per-band threshold
* Subtract - can build noise profiles and subtract noise from the signal
ReaGate
* Ultra-configurable gate
* Sidechain filters, sidechain input
* Lookahead for pre-open
* Hold control
* Hysteresis control
* Variable RMS size
* Can send MIDI events on gate open/close
* Wet/dry mix, noise mix (can add noise when gate is open)
ReaStream
* Supports streaming from host to host of audio and/or MIDI over a LAN segment
* Supports streaming from different host software on each end
* Supports UDP broadcast for streaming one to many (if local network can keep up)
Download here:: Click
lunes, 26 de mayo de 2014
Bitter Sweet - Free Compressor
[Win/Mac, VST/RTAS]
This dynamic processor manages audio transients.
Turning the central button on the sweet side, decreases the transients amplitude.
On the bitter side, the transients amplitude is magnified. Bitter-Sweet also features
a control for the signal to be processed. When the main position is engaged, the process
affects the stereo signal. If Center is engaged, only the M signal of the internal MS matrix
is processed. If stereo is selected, only the S signal from the MS matrix is processed.
As all Flux:: plug-ins it features 64 bit floating point processing, up to 8 channels and up
to 8 FS (384 KHz). Center and Stereo Mode are only available in stereo (2 channels) processing.
Download here::
http://www.fluxhome.com/products/freewares/bittersweet-v3
This dynamic processor manages audio transients.
Turning the central button on the sweet side, decreases the transients amplitude.
On the bitter side, the transients amplitude is magnified. Bitter-Sweet also features
a control for the signal to be processed. When the main position is engaged, the process
affects the stereo signal. If Center is engaged, only the M signal of the internal MS matrix
is processed. If stereo is selected, only the S signal from the MS matrix is processed.
As all Flux:: plug-ins it features 64 bit floating point processing, up to 8 channels and up
to 8 FS (384 KHz). Center and Stereo Mode are only available in stereo (2 channels) processing.
Download here::
http://www.fluxhome.com/products/freewares/bittersweet-v3
lunes, 7 de abril de 2014
Density - Free Compressor
FX, Compressor.
Windows, VST.
Density - smooth and versatile dynamics processing.
at a glance:
• smooth and versatile stereo dynamics processing
• flexible audio encoding and routing
• designed for glueing all things together
• few controls, flexible work
features:
• zero latency processing
• natural, smooth and unobtrusive coherent compression
• modelled transformer circuit
• modern and program dependend release curve
• seemless MS compression and blending
• phase consistent internal mixing
• special 'phat' mode for reduced compression artifacts
• sidechain filtering
• completely SSE optimized
Download here::
http://www.vst4free.com/free_vst.php?id=659
Windows, VST.
Density - smooth and versatile dynamics processing.
at a glance:
• smooth and versatile stereo dynamics processing
• flexible audio encoding and routing
• designed for glueing all things together
• few controls, flexible work
features:
• zero latency processing
• natural, smooth and unobtrusive coherent compression
• modelled transformer circuit
• modern and program dependend release curve
• seemless MS compression and blending
• phase consistent internal mixing
• special 'phat' mode for reduced compression artifacts
• sidechain filtering
• completely SSE optimized
Download here::
http://www.vst4free.com/free_vst.php?id=659
Suscribirse a:
Entradas (Atom)






